A septic tank truck is a vacuum truck that removes spoilage waste from septic tanks, cesspools and chemical toilets (portable toilets) and disposes them at approved wastewater treatment sites.
The CIMC septic tank truck is a dedicated vehicle that combines a powerful vacuum pump with a storage tank for sewage and wastewater.Start the vacuum pump, confirm the suction, and connect the pump to a 4″ or larger vacuum line that the operator uses to empty the septic tank truck.
The CIMC offers a variety of pump sizes and pumping rates, all of them that work on septic pumper trucks will be similar in effect however.This is a very powerful pump, usually weighing 470 pounds, using 6 blades, water cooled, and pumping sewage at 400 cubic feet per minute. It will be apparent that the diaphragm that passes through the unit and into the pump truck will be highly agitated and mixed in the truck. This agitation is correct for any pump used in this application.
Hit the point! This time the customer chose the exclusive model. Tailored according to customer needs, the oil tank truck is equipped with Jiefang J6P380 horsepower engine, super torque, providing surging power, while lower fuel consumption; using three well-known company hydraulic system, superior performance; in addition, Equipped with 8+5 beams, four-directional images, blind spot radar, active right blind spot detection, automatic seat ventilation and heating, unique eagle-eye bright marking, more comfortable driving and high driving safety factor. For more detailed information about the tanker truck, please consult the tanker truck sales manufacturer for details
Reduced iron is a low-carbon porous substance in the form of refined iron powder reduced at low temperature in the furnace. It has stable chemical composition and low impurity content. It is mainly used as a raw material for electric furnace steelmaking. It is a high-quality raw material for smelting high-quality steel and special steel. It is used as a coolant for converter steelmaking, but because it is a low-carbon porous substance, the density is too low to be used directly, and it must be used after high-pressure molding. Iron powder reduction briquetting machine is a good choice.
The structural characteristics of the host of the direct reduced iron briquetting machine. The host is composed of upper and lower beams, hydraulic cylinder assembly, feeding cylinder, mold, hopper, liquid filling assembly, etc. The upper and lower beams are connected by uprights and nuts, and the front end of the main hydraulic cylinder is flanged to the bottom of the beam. The mold is fixed on the lower beam, and the mold sleeve is fixed in the mold. The punch is directly connected to the top of the piston rod of the oil cylinder. Both die sleeve and punch can be disassembled and replaced.
The direct reduced iron briquetting machine has a plate-drawing cylinder located behind the lower mold of the main machine. The plate-drawing cylinder forms the bottom of the cavity with the mold sleeve in the front position, and forms a space at the bottom in the rear position, which is conducive to the falling of the cakes and has the function of pushing the cakes out of the bottom of the mold. The feeding cylinder and the feeding hopper form an automatic feeding mechanism. The feeding of the machine is completed by the reciprocating action of the feeding cylinder. The filling system is located on the side of the beam to replenish the oil required for the rapid advance of the main cylinder.
For detailed information about the direct reduced iron briquetting machine, please consult Luoyang Zhongyuan Mining Machinery Co., Ltd.
The main body of the metal briquetting press adopts a multi-cylinder linkage structure, with 1 main cylinder, 2 side cylinders, 1 cover cylinder, 1 turning cylinder, and 5 hydraulic cylinders in total. The main hydraulic cylinder pushes the pressure head to reciprocate back and forth, the side cylinder pushes the pressure head to reciprocate left and right, the cover cylinder drives the cover plate to open and close, and the turning cylinder pushes the turning mechanism for turning motion.
The metal briquetting machine can be used for cans, paint buckets, iron cans, scrap iron, scrap steel, iron sheets, bicycles, color steel tiles, light and thin materials, pig iron, thin iron, exposed cans, red bull cans, scrap aluminum, scrap copper, iron barrels , Car shells, frames, metal trims, aluminum alloys and other scrap metals are pressed into forming at one time.
Metal briquetting machines are mainly used in recycling and processing industries and metal smelting industries. Various metal scraps, steel scraps, scrap steel, iron scraps, scrap copper, scrap aluminum, aluminum scraps, disassembled car shells, waste oil drums and other metal materials can be extruded into cubes, cylinders and other qualified materials in various shapes . It is convenient to store, transport and recycle, increase the speed of entering the furnace, improve labor efficiency, and reduce transportation, manpower and smelting costs.
For more detailed information about the metal briquetting machine, please consult Luoyang Zhongyuan Mining Machinery Co., Ltd.
The compound crusher (composite crusher) is widely used in the crushing of various ore, cement, refractory materials, bauxite clinker, emery, glass raw materials, and special hard materials. It is widely used in the crushing scope of mechanism construction of sand and various metallurgical slags, and compared with other types of crushers, it has higher profitability.
Principle of Compound Crusher
The material from the compound crusher is affected by the centrifugal force of the vertical impeller rotating at high speed, the surrounding height and the impact of other streams colliding with each impeller material component at high speed on other materials, then they will form a vortex with the impeller and the shell several times of the material Impact, friction and grinding, from the bottom of the compound crusher, form a direct discharge through the closed-loop control of several projection equipment to achieve the specified finished product size.
For detailed information about the compound crusher, please visit Luoyang Zhongyuan Mining Machinery Co., Ltd. directly.
Coal centrifuge is a kind of dehydration equipment that uses the centrifugal force generated by mechanical rotation to realize the separation of solid-liquid mixture. The slime passes through the material inlet and passes through the distribution cone to make the space between the screen basket and the spiral discharge rotor.
Under the action of centrifugal force, water and small particles (centrifugal liquid) pass through the material layer, pass through the screen, flow into the water collection tank on the upper part of the machine base along the upper cover, and then are discharged from the machine through the drain pipes arranged on both sides of the machine base. Outside: The coal particles are kept inside the screen basket. Because there is a speed difference between the spiral discharge rotor and the screen basket, the spiral discharge rotor scrapes the coal particles from the screen and pushes them to the bottom of the screen basket, thereby reducing The dehydrated slime (dehydrated product) is discharged into the collecting hopper under the machine, and this dehydration process is continuously carried out.
The linear vibrating screen uses the vibration motor as the source of vibration power, so that the material is thrown up on the screen while moving forward in a straight line. The material enters the inlet of the screening machine evenly from the feeder, and generates data through the multi-layer screen. The oversieve and undersieve of various specifications are discharged from their respective outlets. It has low energy consumption, high output, simple structure, easy maintenance, fully enclosed structure, no dust spillage, automatic discharge, and is more suitable for assembly line operations.
The linear vibrating screen is driven by dual vibration exciters. When the two vibration exciters are synchronized and rotated in opposite directions, the excitation force generated by the eccentric block cancels each other in the direction parallel to the axis of the motor, and in the direction perpendicular to the axis of the motor. Stacking is a resultant force, so the trajectory of the screen machine is a straight line. The two motor shafts have an inclination angle relative to the screen surface. Under the combined force of the exciting force and the material’s self-gravity, the materials are thrown up and jump forward on the screen surface for linear motion, so as to achieve the purpose of screening and grading the materials. It can be used to realize automated operations in the assembly line. It has the characteristics of low energy consumption, high efficiency, simple structure, easy maintenance, and a fully enclosed structure without dust spillage. The maximum sieving mesh is 400 meshes, which can screen out 7 kinds of materials with different particle sizes.
The banana vibrating screen is a self-synchronizing heavy-duty equal-thickness screen. The screen box is similar to the shape of a banana. The screen beam adopts a box-shaped beam. The vibrator and the exciter are connected by an intermediate transmission shaft.
Banana vibrating screen is widely used in coal grading, desliming, dewatering, de-intermediation, and can also be used for screening in large-volume mining operations in mines. Compared with the traditional sieve of the same specification, the banana vibrating screen developed by our company has a larger processing capacity. Its processing capacity per unit area is 1.5~2 times that of the traditional one. It is a kind of vibrating screen with higher cost performance.
Recently, in Luoyang Aisen Biotechnology Co., Ltd., located in Bisheng Park, Luoyang National University Science and Technology Park, the newly commissioned automatic filling production line of viral nucleic acid extraction kits is busy. The staff are facing a batch of just off the assembly line. The kit is checked and accepted before leaving the factory. This type of product can efficiently and quickly complete the extraction of the new coronavirus.
At the beginning of January this year, with the help of departments at all levels in Luoyang City, Jianxi District and Science and Technology Park, Aisen Biotechnology moved to the new site while producing in batches. The new automatic production line was commissioned before the end of the month, and the production site was expanded to 1,500 square meters. , The production scale has also expanded from 20,000 to 200,000 a day. As of March 21, this year, Aisen Biotechnology has completed the order production of 2.2 million nucleic acid extraction kits. At present, the company’s products are not only meeting the domestic market demand, but also exported to Greece, Zimbabwe and other countries and regions.
At present, Aisen Biotech has passed ISO9001 and ISO13485 quality system certification. Its main products magnetic bead method nucleic acid extraction kit, 32-channel automatic nucleic acid extraction instrument and 96-channel automatic nucleic acid extraction instrument have been registered in China for a class of medical records In addition, the above products have also obtained the EU CE certification and the US FDA certification.
Source: Luoyang University Science and Technology Park
Today I will share with you a topic about the vibrating screen. Vibrating screen is a device specially designed for screening materials in quarries. It can also be used for product classification in coal preparation, mineral processing, building materials, electric power and chemical industries. The screen machine has the characteristics of advanced structure, strong excitation force, low vibration and noise, easy maintenance, sturdiness and durability. Vibrating screens can be divided into light vibrating screens and heavy vibrating screens. Generally, light vibrating screens are used to screen food, medicine, etc.; heavy-duty vibrating screens are generally used to screen ore and used together with crushers.
Features of the device:
1. Large processing capacity and high screening efficiency.
2. The vibrator adopts bearing thin oil lubrication and an external block eccentric structure. It has the characteristics of large excitation force, low bearing load, low temperature and low noise. (Bearing temperature rise is less than 35°).
3. The overall disassembly and assembly of the vibrator is convenient for maintenance and replacement, which greatly shortens the maintenance period. (It only takes 1 to 2 hours to replace the vibrator).
4. The side plate of the screen adopts the whole plate cold work, no welding, high strength and long service life. The cross beam and the side plate are connected by torsion shear high-strength bolts, no welding, and the cross beam is easy to replace.
5. The screen machine adopts rubber spring to reduce vibration. Compared with metal spring, it has the advantages of low noise, long life, smooth cross-vibration zone, and small dynamic load on each fulcrum of the screen machine.
6. The connection between the motor and the vibration exciter adopts a flexible coupling, which has the advantages of long service life and small impact on the motor.
If you want to know more, you can visit Vibrating screen manufacturer。