Adjusting the preload of rodamientos de husillo is a critical task that directly impacts the performance, precisión, and longevity of the spindle. Preload refers to the force applied to the bearings during assembly to eliminate internal clearance and enhance rigidity. Here’s a step-by-step guide to adjusting the preload of spindle bearings:
Spindle bearing preload adjustment method
1. Understand the Bearing Type
Rodamientos de rodillos cónicos: These bearings typically require a specific preload for optimal performance.
Angular Contact Bearings: These are commonly used in spindles and also require precise preload adjustments.
Rodamientos de bolas: May be preloaded depending on the application, often with springs or other mechanisms.
2. Prepare the Necessary Tools and Equipment
Llave de torsión
Dial indicator or micrometer
Bearing heater (if thermal methods are used)
Manufacturer’s service manual or preload specifications
3. Clean and Inspect Components
Ensure all bearing surfaces, housing, and spindle shaft are clean and free of debris or damage.
Inspect the bearings for any signs of wear or defects.
4. Assemble the Bearings and Components
Install Bearings: Carefully place the bearings on the spindle shaft or in the housing. Use a bearing heater if thermal expansion is needed to fit the bearings without damage.
Apply Initial Tightening: Lightly tighten the components (nueces, sleeves, etc.) to hold the bearings in place.
5. Adjust the Preload
For Tapered Roller Bearings:
Tighten the adjustment nut to eliminate any endplay.
Continue tightening until you achieve the specified preload torque, typically given in the manufacturer’s manual.
Measure the rotational torque or use a dial indicator to check for the correct preload. The spindle should rotate smoothly without any play.
For Angular Contact Bearings:
Preload is often applied through a spacer or spring mechanism. Ensure the spacer thickness matches the manufacturer’s preload specification.
Assemble the spindle, and adjust the preload by tightening the nut or adjusting the spring tension according to the manufacturer’s recommendations.
…
For more detailed information on the spindle bearing preload adjustment method, por favor haga clic aquí: https://www.lkwebearing.com/news-center/spindle-bearing-preload-adjustment-method.html
