Shaft forgings should choose different materials and adopt different heat treatment specifications (such as quenching and tempering, normalizing, quenching, etc.) according to different working conditions and use requirements, in order to obtain certain strength, toughness and wear resistance. 45 steel is a commonly used material for shaft forgings. It is cheap and can obtain better cutting […]
During the operation of the excavator, the slewing bearing has to bear a large impact load. When the excavator is tilted, the stress state is even more unfavorable. Generally, when the excavator runs for about 350,000 hours, the slewing bearing of the excavator may be crushed or broken, and the tooth profile wear and broken teeth at […]
Thin-walled crossed roller bearings are composed of crossed cylindrical roller bearings and crossed tapered roller bearings. Due to their particularity and incomparable advantages over other bearings, they are widely used, and some damages will inevitably occur in the use engineering , so what are the damage forms of thin-walled cross rollers? Surface wear and peeling […]
https://www.ls-casting-mold.com/wp-content/uploads/2022/05/PU20.02602.jpg700700lsmojvhttp://www.ls-casting-mold.com/wp-content/uploads/2018/12/lslogo-300x138.pnglsmojv2023-01-11 14:49:002023-01-11 14:49:00What are the damage forms of thin-walled crossed roller bearings?
The clutch assembly consists of three sets of tractor clutch disc, clutch pressure plate and release bearing. The tractor clutch disc is a composite material with friction as the main function and structural performance requirements. Friction materials are mainly used to manufacture brake friction plates and tractor clutch discs. The inner end of each release lever […]
https://www.ls-casting-mold.com/wp-content/uploads/2022/03/12-Inch-16-Spline-Main-Disc-With-Spring-e1646271072574.jpg400600lsmojvhttp://www.ls-casting-mold.com/wp-content/uploads/2018/12/lslogo-300x138.pnglsmojv2023-01-11 14:40:572023-01-11 14:40:57How to adjust the height of tractor clutch lever
The grow rack technology provides convenience for plant lovers, but the temperature and humidity control of the grow rack is particularly important for plants. Too high or too low temperature and humidity will affect the planting quality and even cause diseases and insect pests. If some effective measures can be taken to make the ventilation and cooling […]
The bottom paste process of traditional paper yarn composite bags mainly adopts the method of artificial bottom paste, which has low production efficiency, uneven specifications and low quality; practice shows that in the case of producing paper bags of the same specification, the bottom paste can be improved compared with manual sewing. 20% capacity, 8% […]
https://www.ls-casting-mold.com/wp-content/uploads/2022/02/糊底机全图-e1644893738778.jpg600600lsmojvhttp://www.ls-casting-mold.com/wp-content/uploads/2018/12/lslogo-300x138.pnglsmojv2023-01-11 14:24:562023-01-11 14:24:56Overall scheme design of paper yarn composite bag square bottom machine
With the further development of the industry, the lime deep processing industry has a broad market prospect, and the professional lime deep processing production line is the equipment that helps the industry create value. Professional calcium hydroxide production line equipment, with the advantages of high efficiency and high output, environmental protection and noise reduction, helps calcium hydroxide […]
https://www.ls-casting-mold.com/wp-content/uploads/2022/02/移动氢氧化钙生产线7-e1644565056663.jpg529600lsmojvhttp://www.ls-casting-mold.com/wp-content/uploads/2018/12/lslogo-300x138.pnglsmojv2023-01-11 14:12:402023-01-11 14:12:40HOW MUCH IS CALCIUM HYDROXIDE PRODUCTION LINE
The process in which the broken material is divided into different particle sizes through one or several layers of sieve surface is called sieving. The vibrating screen is a vibrating screen that uses the relative movement between the bulk material and the screen surface to make some particles pass through the screen holes, and divide sand, gravel, […]
https://www.ls-casting-mold.com/wp-content/uploads/2022/02/Vibrating-Screen4-1.jpg450600lsmojvhttp://www.ls-casting-mold.com/wp-content/uploads/2018/12/lslogo-300x138.pnglsmojv2023-01-11 14:04:492023-01-11 14:04:49What are the vibrating screen techniques?
The hammer head of the crusher is an important part to ensure the normal production of ore materials. It not only affects the output of sand and gravel aggregates, but also affects the quality of finished products. Many users are deeply troubled by the serious wear of the hammer head. So how to deal with […]
https://www.ls-casting-mold.com/wp-content/uploads/2022/03/20181211140425_4358.jpg450700lsmojvhttp://www.ls-casting-mold.com/wp-content/uploads/2018/12/lslogo-300x138.pnglsmojv2023-01-11 13:53:262023-01-11 13:53:26How to deal with the severe wear of the hammer head of the crusher?
TECHNICAL REQUIREMENTS FOR FORGED SHAFT FORGINGS
Shaft forgings should choose different materials and adopt different heat treatment specifications (such as quenching and tempering, normalizing, quenching, etc.) according to different working conditions and use requirements, in order to obtain certain strength, toughness and wear resistance. 45 steel is a commonly used material for shaft forgings. It is cheap and can obtain better cutting […]
How to Repair Excavator Slewing Bearing
During the operation of the excavator, the slewing bearing has to bear a large impact load. When the excavator is tilted, the stress state is even more unfavorable. Generally, when the excavator runs for about 350,000 hours, the slewing bearing of the excavator may be crushed or broken, and the tooth profile wear and broken teeth at […]
What are the damage forms of thin-walled crossed roller bearings?
Thin-walled crossed roller bearings are composed of crossed cylindrical roller bearings and crossed tapered roller bearings. Due to their particularity and incomparable advantages over other bearings, they are widely used, and some damages will inevitably occur in the use engineering , so what are the damage forms of thin-walled cross rollers? Surface wear and peeling […]
How to adjust the height of tractor clutch lever
The clutch assembly consists of three sets of tractor clutch disc, clutch pressure plate and release bearing. The tractor clutch disc is a composite material with friction as the main function and structural performance requirements. Friction materials are mainly used to manufacture brake friction plates and tractor clutch discs. The inner end of each release lever […]
Detailed Explanation of Grow Rack Ventilation Solutions
The grow rack technology provides convenience for plant lovers, but the temperature and humidity control of the grow rack is particularly important for plants. Too high or too low temperature and humidity will affect the planting quality and even cause diseases and insect pests. If some effective measures can be taken to make the ventilation and cooling […]
Overall scheme design of paper yarn composite bag square bottom machine
The bottom paste process of traditional paper yarn composite bags mainly adopts the method of artificial bottom paste, which has low production efficiency, uneven specifications and low quality; practice shows that in the case of producing paper bags of the same specification, the bottom paste can be improved compared with manual sewing. 20% capacity, 8% […]
HOW MUCH IS CALCIUM HYDROXIDE PRODUCTION LINE
With the further development of the industry, the lime deep processing industry has a broad market prospect, and the professional lime deep processing production line is the equipment that helps the industry create value. Professional calcium hydroxide production line equipment, with the advantages of high efficiency and high output, environmental protection and noise reduction, helps calcium hydroxide […]
What are the vibrating screen techniques?
The process in which the broken material is divided into different particle sizes through one or several layers of sieve surface is called sieving. The vibrating screen is a vibrating screen that uses the relative movement between the bulk material and the screen surface to make some particles pass through the screen holes, and divide sand, gravel, […]
How to deal with the severe wear of the hammer head of the crusher?
The hammer head of the crusher is an important part to ensure the normal production of ore materials. It not only affects the output of sand and gravel aggregates, but also affects the quality of finished products. Many users are deeply troubled by the serious wear of the hammer head. So how to deal with […]