The quality of molten iron has a great influence on the lost cast iron parts. The influence of improper misalignment temperature on the defects of lost cast iron parts and the requirements of hot metal quality of different cast iron parts are analyzed. The measures and adjustment methods to prevent casting defects are analyzed. Lost […]
https://www.ls-casting-mold.com/wp-content/uploads/2018/12/workshop3.jpg525700lsmojvhttp://www.ls-casting-mold.com/wp-content/uploads/2018/12/lslogo-300x138.pnglsmojv2019-03-25 17:27:492019-03-25 17:27:49Special requirements for molten iron in lost foam casting
The density of the lost foam pre-expanded beads determines the density and degree of fusion of the various parts of the die, and the quality of the die determines the quality of the casting. The main factors affecting the density of the pre-expanded beads of the lost foam are the quality of the raw materials […]
https://www.ls-casting-mold.com/wp-content/uploads/2019/01/cylinder-liner-Engine-block4.jpg262347lsmojvhttp://www.ls-casting-mold.com/wp-content/uploads/2018/12/lslogo-300x138.pnglsmojv2019-03-11 10:00:032019-03-11 10:03:22How to obtain a uniform density of lost foam pre-expanded beads
One of the characteristics of the mold-molding mold is that hot steam and cooling water need to be introduced into the closed mold gas chamber to mature and cool the foam particles, which is different from the molding environment of molds such as plastic molds, metal molds and die-casting molds. The mold needs to form […]
https://www.ls-casting-mold.com/wp-content/uploads/2018/12/Pump-cover-mould.jpg19202560lsmojvhttp://www.ls-casting-mold.com/wp-content/uploads/2018/12/lslogo-300x138.pnglsmojv2019-03-03 21:46:142019-03-03 21:46:14Automatic ejection for the application of lost foam technology
With the rapid development of the automobile industry, the production and use of large-scale stamping parts has increased sharply, and the demand for medium and large-sized molds has also increased significantly. In recent years, a large number of researches and practices have shown that the yield strength of nodular cast iron is higher than that […]
https://www.ls-casting-mold.com/wp-content/uploads/2019/01/Production-site1.jpg600800lsmojvhttp://www.ls-casting-mold.com/wp-content/uploads/2018/12/lslogo-300x138.pnglsmojv2019-02-25 20:16:292019-02-25 20:16:29Application of lost foam coating on large mold castings
According to the sharding scheme, the gearbox needs to be divided into 2 sets of fully automatic lost foam molds and 1 set of adhesive molds. According to the foundry manufacturer’s automatic vertical forming machine and vertical automatic glue machine, the lost mold structure and adhesive The modular structure uses the following scheme: First, the […]
The production of aluminum alloy castings by the lost foam process has become an unstoppable trend. Cylinder top cover, new energy vehicle gearbox, heavy truck gearbox, etc., have gradually realized mass production in China, especially the mass production of 12-speed truck gearboxes. It marks the arrival of a new era of China’s lost foam aluminum […]
https://www.ls-casting-mold.com/wp-content/uploads/2018/12/Water-shell-mould.jpg8501100lsmojvhttp://www.ls-casting-mold.com/wp-content/uploads/2018/12/lslogo-300x138.pnglsmojv2019-01-28 10:19:382019-01-28 13:42:06Refractory coating for lost foam casting
If you are looking for technical issues related to lost foam casting, design points, or how to apply them on castings, then the following is exactly what you want to see. From the choice of materials to the production of white molds, the process is ultimately. First of all, about the white mold In the […]
The surface strengthening and modification technology of the forging die can design the surface of the die and the substrate as a system, and comprehensively utilize the surface strengthening modification technology and the coating technology to make the surface itself difficult to obtain and hopefully have specific performance. . The treatment technology that uses modern […]
Special requirements for molten iron in lost foam casting
The quality of molten iron has a great influence on the lost cast iron parts. The influence of improper misalignment temperature on the defects of lost cast iron parts and the requirements of hot metal quality of different cast iron parts are analyzed. The measures and adjustment methods to prevent casting defects are analyzed. Lost […]
How to obtain a uniform density of lost foam pre-expanded beads
The density of the lost foam pre-expanded beads determines the density and degree of fusion of the various parts of the die, and the quality of the die determines the quality of the casting. The main factors affecting the density of the pre-expanded beads of the lost foam are the quality of the raw materials […]
Automatic ejection for the application of lost foam technology
One of the characteristics of the mold-molding mold is that hot steam and cooling water need to be introduced into the closed mold gas chamber to mature and cool the foam particles, which is different from the molding environment of molds such as plastic molds, metal molds and die-casting molds. The mold needs to form […]
Application of lost foam coating on large mold castings
With the rapid development of the automobile industry, the production and use of large-scale stamping parts has increased sharply, and the demand for medium and large-sized molds has also increased significantly. In recent years, a large number of researches and practices have shown that the yield strength of nodular cast iron is higher than that […]
Lost mold structure and adhesive mold structure
According to the sharding scheme, the gearbox needs to be divided into 2 sets of fully automatic lost foam molds and 1 set of adhesive molds. According to the foundry manufacturer’s automatic vertical forming machine and vertical automatic glue machine, the lost mold structure and adhesive The modular structure uses the following scheme: First, the […]
Lost mold for aluminum alloy gearbox
The production of aluminum alloy castings by the lost foam process has become an unstoppable trend. Cylinder top cover, new energy vehicle gearbox, heavy truck gearbox, etc., have gradually realized mass production in China, especially the mass production of 12-speed truck gearboxes. It marks the arrival of a new era of China’s lost foam aluminum […]
Refractory coating for lost foam casting
lost foam casting method and technique
If you are looking for technical issues related to lost foam casting, design points, or how to apply them on castings, then the following is exactly what you want to see. From the choice of materials to the production of white molds, the process is ultimately. First of all, about the white mold In the […]
Top ten forging mold surface treatment technology
The surface strengthening and modification technology of the forging die can design the surface of the die and the substrate as a system, and comprehensively utilize the surface strengthening modification technology and the coating technology to make the surface itself difficult to obtain and hopefully have specific performance. . The treatment technology that uses modern […]