В повседневной жизни, oil tank truck is a very common means of transporting dangerous goods, because its transportation objects are mostly all kinds of flammable and explosive oil products, so the safe transportation of oil tanker is the key of every tanker driver. What should be paid attention to, what are the common oil tank truck faults, and how should we deal with these problems? The following is a tank truck manufacturer–CIMC LINYU, to analyze the common oil tank truck faults and solutions.
Oil Tank truck faults can generally be divided into indirect failures and sudden failures. When a failure occurs, we need to first determine the cause of the failure, and then carry out targeted treatment.
1. The oil absorption of the oil tank truck is abnormal
The reasons for the abnormal oil absorption of the tanker are generally: there is no oil in the oil pump; the oil absorption depth is more than 5m; the valve opening position is not correct. Для решения этой проблемы, we can fill the oil tank to at least 10L, and adjust the valve to the appropriate position That’s it. If the fuel tank of the tanker cannot discharge oil, it may be an impurity oil discharge pipe. Может использоваться для автоматизации операций на сборочной линии., just cleaning the oil pipe can solve the problem.
2. The oil tank truck cannot absorb oil or absorb less oil
The reasons for the oil tanker not being able to absorb oil or the amount of oil being absorbed are: the suction pipe part is not tightly sealed; the gap of the oil pump is increased. В это время, we only need to make the seal tight, and check and repair the oil pump.
3. The power take-off box of the oil tank truck is abnormal
The reasons for the abnormality of the power take-off box of the tanker are as follows:
(1) The pressure of the car is insufficient, и коробка отбора мощности не включена;
(2) Воздушный тракт не герметичен, а коробка отбора мощности заморочена;
(3) Воздушная камера повреждена, и коробка отбора мощности не зацеплена;
(4) Слишком мало смазочного масла или загрязнений в коробке отбора мощности;
(5) Износ деталей коробки отбора мощности
Для вышеуказанных проблем, нам обычно достаточно воздуха только в пневматической коробке отбора мощности, так что показания манометра воздуха выше 0,6 МПа, воздушный контур строго герметичен, вовремя проверяйте воздушную камеру, refuel or update the lubricating oil, dismantle and inspect, clean and replace the worn parts. Can.
…
Подробности доступны здесь:https://www.ly-cimc-linyu.com/a/news/Oil-tank-truck-faults.html
