The main reasons why the máquina de hacer briquetas de carbón does not remove the balls include excessive moisture content of the material, fuerza de presión insuficiente del embrión de bola, superficie rugosa de la nueva rótula, desalineación de la rótula, espacio inadecuado entre los rodillos, velocidad inadecuada de los rodillos, control inadecuado de la humedad del material, improper use of material adhesives, etc. ‌For the problem of the briquetting machine not removing the balls, we have made a detailed summary for you, vamos a ver.

Reasons for the briquetting machine not to remove the balls

briquetting machine

1. Inadequate Material Moisture Content

Problema: If the raw material’s moisture content is either too high or too low, it can affect the briquette formation and removal.

Porque: High moisture makes the material too sticky, causing it to adhere to the rollers, while low moisture may lead to insufficient binding, causing the briquettes to crumble.

y las razones deben ser investigadas y tratadas a tiempo para resolver: Adjust the moisture content to the optimal level recommended for the specific material being used.

2. Worn or Damaged Rollers

Problema: The rollers in a briquetting machine compress the material into briquettes. If they are worn out or damaged, the material may not compress correctly, leading to poor briquette formation.

Porque: Tiempo extraordinario, the constant pressure and abrasion can wear down the rollers or create grooves and pits on their surface.

y las razones deben ser investigadas y tratadas a tiempo para resolver: Regularly inspect and maintain the rollers. Replace or refurbish them if they show significant wear or damage.

3. Improper Roller Alignment

Problema: Misalignment of the rollers can cause uneven pressure distribution, leading to incomplete or poor briquette formation.

Porque: Misalignment can occur due to improper installation, mechanical issues, or wear and tear over time.

y las razones deben ser investigadas y tratadas a tiempo para resolver: Check and realign the rollers according to the machine’s specifications. Regular maintenance is key to preventing this issue.

briquetting machine

4. Inadequate or Excessive Feeding

Problema: The feeding mechanism controls the amount of material entering the machine. Inadequate feeding can lead to underfilled briquettes, while excessive feeding can cause material overflow and jamming.

Porque: Incorrect settings, blockages in the feeding system, or inconsistent material flow can cause feeding issues.

y las razones deben ser investigadas y tratadas a tiempo para resolver: Adjust the feeding mechanism to ensure a consistent and appropriate material supply. Clear any blockages and ensure smooth material flow.

For more detailed information about the reasons why the briquetting machine does not produce balls, por favor haga clic para visitar: https://www.zymining.com/en/a/news/reasons-for-the-briquetting-machine-not-to-remove-the-balls.html